引信全电子安全系统失效分析及评估

本文根据全电子安全系统的一般结构模式,分析了其安全性设计的一般特点和可能造成其失效的各种原因,并在此基础上建立了全电子安全系统的失效故障树,给出了失效概率的定量计算结果。     

平面交叉杆系变形协调普适方程及其通解

本文运用拓扑学、微分学、几何学的数学方法,捕捉到平面三交叉杆系的变形特点——拓扑特征.在小变形条件下,通过变换得到变形协调普适方程.从而推导出解此类拉压超静定问题的一种快速有效方法.该方法可直接应用于教学与工程计算.     

聚碳硅烷先驱体制备SiC基复合材料的性能研究

本文以聚碳硅烷(PCS)为先驱体,SiC晶须,SiC微粉或C纤维为增强剂,热解转化制得SiC/SiC或C/SiC复合材料,研究其制备工艺过程对材料的力学和热物理性能的影响。结果表明:PCS在1300℃下转化为β-SiC微晶并将未烧结的增强剂网络在一起形成SiC/SiC或C/SiC复合材料。该SiC基复合材料具有较好的常温和高温机械强度,优异的耐热疲劳和抗热震性能,在1300℃空气中具有良好的抗氧化性。     

Periodic review inventory management with contingent use of two freight modes with fixed costs

We study a stochastic inventory model of a firm that periodically orders a product from a make‐to‐order manufacturer. Orders can be shipped by a combination of two freight modes that differ in lead‐times and costs, although orders are not allowed to cross. Placing an order as well as each use of each freight mode has a fixed and a quantity proportional cost. The decision of how to allocate units between the two freight modes utilizes information about demand during the completion of manufacturing. We derive the optimal freight mode allocation policy, and show that the optimal policy for placing orders is not an (s,S) policy in general. We provide tight bounds for the optimal policy that can be calculated by solving single period problems. Our analysis enables insights into the structure of the optimal policy specifying the conditions under which it simplifies to an (s,S) policy. We characterize the best (s,S) policy for our model, and through extensive numerical investigation show that its performance is comparable with the optimal policy in most cases. Our numerical study also sheds light on the benefits of the dual freight model over the single freight models. © 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011     

基于聚类算法的多无人机系统任务分配

针对现有任务分配方法在任务点较多时不易解算,且计算量大的问题,提出了基于模糊C-均值聚类算法的多无人机系统任务分配方法.首先,利用模糊C-均值聚类算法得到的隶属度矩阵对任务点进行初始分配;其次,针对基于空间划分聚类可能造成各UAV任务不均衡的问题,设计任务的局部优化调整规则;最后,结合单旅行商问题,利用Tabu Sea...     

Quantifying the performance effects of idle time utilization in multiserver systems

In many practical multiserver queueing systems, servers not only serve randomly arriving customers but also work on the secondary jobs with infinite backlog during their idle time. In this paper, we propose a c‐server model with a two‐threshold policy, denoted by (e d), to evaluate the performance of this class of systems. With such a policy, when the number of idle servers has reached d (<c), then e (<d) idle agents will process secondary jobs. These e servers keep working on the secondary jobs until they find waiting customers exist in the system at a secondary job completion instant. Using the matrix analytic method, we obtain the stationary performance measures for evaluating different (e, d) policies. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2007.     

解析美国大学TESL硕士培养的主要课程与设置理据——以曼卡托明尼苏达州立大学为例

把英语作为第二语言的教学是20世纪60年代在美国兴起并逐步走向独立的科目,它在综合相关专业的同时正在朝专业化方向发展。近年来其硕士层面的教育为全球培养了大量合格的中小学英语教师,取得了较好的成绩。本文以曼卡托明尼苏达州立大学英语系为例,并结合笔者在该系攻读TESL硕士学位时的经历,解析其主要课程及设置理据。     

聚氯乙烯／氯化聚乙烯封套材料性能研究

研究聚氯乙烯/氯化聚乙烯封套材料的性能,测试封套材料的透湿率、拉伸强度和扯断伸长率。研究表明,随着氯化聚乙烯用量的增加,封套材料的透湿率和拉伸强度降低,扯断伸长率提高,但CPE的质量分数应控制在20.2%下。     

多输出性能下的重要性测度指标及其求解方法

针对基于马氏距离的重要性测度存在的问题,提出了基于谱分解加权摩尔彭罗斯马氏距离的重要性测度指标,通过构造多输出协方差阵的广义逆矩阵以及谱分解的策略,有效解决了协方差阵求逆奇异情况以及由于未能充分考虑多输出之间的相互关系而导致的错误识别重要变量的问题,克服了基于马氏距离指标的局限性。数值算例与工程算例结果表明:所提重要性测度可以更加准确地获得输入变量对结构系统多输出性能随机取值特征贡献的排序,从而为可靠性设计提供充分的信息。     

(修，2撤3)关键几何参数对超声速膨胀器流场和性能影响的数值研究

为了揭示关键几何参数对超声速膨胀器流动特性影响的规律,对3种隔板安装角和5种出进口面积比超声速膨胀器设计工况下的流场进行了数值研究。结果表明：随隔板安装角增加,斜激波向出口迁移,斜激波强度略有降低,超声速膨胀器膨胀比减小,效率提高;随出进口面积比增加,流道内高速区显著扩大并逐渐靠近压力面,斜激波增强,出口流动损失增加,超声速膨胀器膨胀比增大,效率降低。为获得综合性能较优超声速膨胀器结构,需在较小出进口面积比和较大隔板安装角之间做折衷选择。